Table of Contents
Advertisement
VMT6008
8.1.2 COM Input Configuration
COM input configuration allows the application to verify the correct RFID function. By activation of
COM2,the data is send automatically to an active application that uses the COM2 port forwarded.
Note:
Unnecessary applications that use the COM2 port must be stopped before
running the COM input configuration. Because of different programming,
data on various editors like Notepad or Word are represented differently.
8.1.3 Ignition
The ignition application allows the control of the VMT6 device ignition function. If the status is set to
Enabled, the device is switched off after expiry of the preset period of time.
© ads-tec GmbH • Heinrich-Hertz-Str.1• 72622 Nürtingen
35
Advertisement
Table of Contents
