VMT6008
How to operate the Soft Keyboard from Version 3.11::
Note:
If a function is to be activated which requires pressing two keys at the same
time (e.g. Alt + F4), these keys have to be pushed one after another at the
soft keyboard, and the special keys Shift, Alt and Ctrl must always be
pushed first.
Due to differences in programming of a large variety of software
programmes, we cannot ensure that the soft keyboard works properly with
all available software.
When deactivating the soft keyboard, the previously active state
(alphanumeric / numeric keys or function keys) will be stored and will be
displayed when re-activating the keyboard.
Pos : 22 /D atentec hni k/Bedienung/T ouch Scr een/T ouch Scr een für VMT 60xx @ 1\mod_1246361069977_6.doc @ 5853 @
5.3 TouchScreen
The control system is equipped with a touch screen monitor. The touch screen monitor is internally
connected with the USB interface. The driver software required for using the touch screen is integrated
in the corresponding operating system, or can alternatively be installed from the enclosed service CD.
Pos : 23 /D atentec hni k/Bedienung/Status-Anzeig en/SYS- LED/SYS- LED für VMT 60xx- Serie @ 2\mod_1260525540269_6.doc @ 6876 @
© ads-tec GmbH • Heinrich-Hertz-Str.1• 72622 Nürtingen
Activate and deactivate the soft keyboard for letter/character input
using the touch screen
Switches numeric keys on and off (only if numeric keys are visible)
Switching between different representations (Alphanumeric keys
Numeric keys Function key bar)
Soft keyboard representation, zoom in
Soft keyboard representation, zoom out
16