VMT6008
6.5 USB-Interface
The USB interfaces are used for connecting peripherals with USB connection. These interfaces comply
with the USB 2.0 standard requirements.
Pin-Number
1
2
3
4
Note:
The device supports a maximum of 8 external USB mass storage devices. If
a USB Flash SSD is integrated, a maximum of 7 USB mass storage devices
can be connected.
Note:
The USB interfaces can be individually locked by using the "Lock USB"
software tool.
USB-Interface in Front panel
One USB interface can be accessed from the front. The interface is located under a plastic cover
underneath the display. The cover has a tab on the right-hand side, which is used for opening. The
plastic cover of the USB interface must be returned in protective position after use.
Pos : 30 /D atentec hni k/Schnitts tell en/PS2/Kombi Buc hs e für VMT 60xx @ 2\mod_1268840073235_6.doc @ 7482 @
6.6 PS/2 Interface
A keyboard can directly be operated by using the PS/2 socket connector.
Pin-Number
1
2
3
4
5
6
© ads-tec GmbH • Heinrich-Hertz-Str.1• 72622 Nürtingen
Signal-Name
VDC
D -
D +
GND
Signal-Name
Keyboard Data
Mouse Data
GND
+5V
Keyboard Clock
Mouse Clock
26