Software / Driver Installation; Initial Installation Of The Operating System; Write Protection; Cleaning - ADS-tec VMT9000 Series Instruction Manual

Table of Contents

VMT9000 series − Instruction manual v1.2

8 Software / driver installation

The device will be delivered with a pre-installed operating system depending on what the customer

wants. If the mass storage has been reformatted, the operating system can be reinstalled by using one

of the existing interfaces.

Installing operating system via a USB interface

1. Connect an external USB drive and a keyboard.

2. Restart the device and press the ESC key to call up the boot menu.

3. Insert an operating system CD into the external drive.

4. In the boot menu, select booting from the external drive and start.

5. Installation of the operating system and configuration of the basic data.

6. With devices with touch-screens, the touch-screen driver as well as the soft keyboard should be

installed in order to ensure full functionality.

Installing the operating system using PXE

Alternatively, the operating system can also be installed via a network using the PXE functionality (PXE

= Preboot Execution Environment). To do so, the appropriate BootROM Extension must first be

activated in the BIOS and then selected in the boot menu. The steps to be taken next depend on the

network environment and the operating system to be installed.

The calibration data of the touch-screen is retained when the mass storage is

formatted.

this write protection must be removed again before changes are made to the software installation. ⇨

Important: If the mass storage or parts of it have been write-protected in the Configuration Center,

Unified Write Filter

After the software installation has been changed, the write protection must be set again and the device

restarted.

Clean the device using some glass cleaner on a soft cloth.

Table of Contents

Show Quick Links

Table of Contents

Vmt9010 Vmt9012 Vmt9112 Vmt9015