Table of Contents
Advertisement
7 S
OFTWARE
The device will be delivered with a pre-installed Windows / Linux operating system
depending on what the customer wants. The drivers required for this are already installed
and the operating system will be enabled by entering the licence information. Should an
initial installation be required, please follow the following steps. With a newer operating
system like Windows XP, the network card and graphics card will properly be recognised
during the initial installation, so that only the touch screen driver and the soft keyboard
must be installed separately.
Note:
If the hard drive was formatted, the operating system can be reinstalled by using one of
the existing interfaces.
An external keyboard is required for installation.
7.1 I
NSTALLING THE OPERATING SYSTEM
The device does not have any integrated CD drive. The installation of the operating system
can therefore only be carried out by using the USB interface.
Procedure for installation:
•
•
•
•
With Windows CE 6.0 or Windows XP embedded, a complete image can also be installed
by using a USB stick.
Pos : 36 /D atentec hni k/Softwar e / Trei ber Install ati on/Touc h Screen/Touc h Screen Installation für OPC 7000 / VMT 6000 @ 2\mod_1271148800775_6.doc @ 7622 @
30
&
DRIVER INSTALLATION
The boot drive in the system Bios must be switched to USB in order to boot the
device from the USB interface.
Restart the device and insert a Windows CD.
Install Windows and set up the basic data.
With devices including touch screens, the touch screen driver as well as the soft
keyboard should be installed in order to ensure their full functionality.
Terminals VMT6008
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
Advertisement
Table of Contents
