Table of Contents
Advertisement
Terminals VMT6008
6 D
RIVES
6.1 H
ARD DRIVE
The storage medium is selected according to the customer requirements. The following
options are available for storage:
Flash SSD:
Note:
Recommendation for the choice of storage medium with a basic installation:
SSD Flash memory: Windows CE 6.0 / Windows XP embedded
Pos : 34 /D atentec hni k/Laufwer ke/Exter ne Laufwerke/Exter ne Laufwer ke für OPC 5112 / 5115 / 5117 / IPC 1100 / CPC / PLC / OTC / ITC / VMT-Serie @ 0\mod_1158926656205_6.doc @ 563 @
6.2 E
XTERNAL DRIVES
By default, no drive for removable media (CD/floppy disk) is integrated in the device.
Instead, the system provides a USB interface, to which an external drive can be connected.
In this case you'd have to ensure that the used device is suitable for industrial
environments.
Warning:
Connecting or disconnecting external drives during operation is not admissible, since it
cannot be excluded that the drive might be in use while connecting or disconnecting it.
Data loss might result in the event of non-compliance!
Pos : 35 /D atentec hni k/Softwar e / Trei ber Install ati on/Installati on des Betriebss ystems/Installation des Berti ebs s ystems für VMT 60xx @ 2\mod_1263211380903_6.doc @ 6940 @
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
/ F
SSD
LASH
A Flash SSD with a storage capacity of at least 1GB is used. Its capacity
depends on the desired operating system and the additional
programmes to be installed.
29
Advertisement
Table of Contents
