Jolly Mec AERJOLLY 80 EVO 15 Instructions For Installation, Use And Maintenance Manual page 28
Hide thumbs
Also See for AERJOLLY 80 EVO 15:
Table of Contents
Advertisement
8- Insert the deflector (D).
Deflector (D) must be positioned in the combustion chamber with the sheet metal part (a) pointing upwards.
Tilt the deflector in order to insert it into the combustion chamber (Fig. 22). Once inside the combustion chamber, take it up to the fireplace
rear wall and turn it in vertical position to lift it and lean it on its front support (b) and rear support of the central rear panels (c) (Fig.23-24).
Proper assembly side
e) Standard handle disassembly
To disassemble the standard handle, in order to use the optional handle for vertical sliding door opening, follow the steps below:
1 - Lift the door (FIG. 1).
2 - Unscrew the two screws (1) to remove the standard handle (2). After removing the handle, re-screw the screws (FIG. 2).
28
b
a
2
1
c
Advertisement
Table of Contents
