Jolly Mec AERJOLLY 80 EVO 15 Instructions For Installation, Use And Maintenance Manual page 25

2- Insert the side panel (A) in the right side and towards the fireplace door.
Side panel (A) must be positioned in the combustion chamber with the shaped part (a) pointing downwards.
Tilt the panel in order to insert it into the combustion chamber (Fig. 4). Once inside the combustion chamber, it is possible to position it
vertically, to push it against the wall and in its front seat towards the fireplace door (Fig. 5-6).
The shaped part (a) of the side panel must lean on the shaped part (b) of the fire bed panels.
a
Proper assembly side
3- Insert the rear central panel (B) at the centre of the combustion
chamber rear side.
The rear central panel (B) must be positioned in the combustion
chamber with logo pointing towards the fireplace door.
Tilt the panel in order to insert it into the combustion chamber (Fig.
7). Once inside the combustion chamber, it is possible to position it
vertically, to push it against the front wall (Fig. 8-9).
The shaped lower part of the central panel must lean on the shaped
part (b) of the fire bed panels.
b
Proper assembly side
25