Sears Kenmore 73251 Installation Manual page 48

THE PROBLEM SOLVER (coot ued)
PROBLEM
SURFACEBURNERS
LIGHT BUT OVEN
DOES NOT
POSSIBLE CAUSE
• The oven gas shut off valve may have accidentally been moved during
cleaning or moving.
To check the oven gas shut off valve on dual burner models, raise the
cooktop and look for the gas shut off lever at the extreme right rear corner.
To check the oven gas shut off valve on sealed burner models, remove
the storage drawer; broiler drawer or kick panel and look for the gas shut
off lever at the back of the range. On some models you may have to
remove an access cover also.
Sealed
Burner
Models
FOOD DOES NOT
BROIL PROPERLY
FOOD DOES NOT ROAST
OR BAKE PROPERLY
i:
Dual Burner Models
f shown closed \\
Push down _ \
= Oven controls not properly set. See the Broiling section.
o Oven door and or broiler drawer not closed.
o Improper shelf position being used_ See the Broiling section,
• Food is being cooked on a hot pan.
° Cookware is not suited for broiling.
o Aluminum foil used on the broiler pan rack has not been fitted properly
and slit as recommended'.
o Oven bottom not securely seated in position
o Oven controls not properly seL See the Baking or Roasting section.
o Shelf position is not correct.
o Incorrect cookware or cookware of improper size is being used.
• Over] thermostat needs adjustment. See the Adjust the Oven Thermostat--
Do It Yourself section.
° Clock not set correctly.
o Aluminum foil used improperly in the oven.
o Oven bottom not securely seated in position,
48