Advertisement
Available languages
Available languages
Operating the Se f=Caeaning Oven (continued)
How to Set the Amount of Cleaning Time
Models
with press pads:
The clean cycle is normally
3 hours., You can change
the clean
time to any time between
2 and 4 hours
depending
on the amount
of soil in your oven,
1. Turn the OVEN
SET knob
and the OVEN TEMP
knob to CLEAN,, Slide the latch handle to the right
as far as it will go,,
2. Press
the
UP or DOWN
pad to set the desired
cleaning
time.
You have one minute to change
your clean time after
the cleaning
time of 3 hours is displayed.
Models
with dials:
Set the automatic
oven timers: Make sure the range
clock
is set to the correct
time
of day. Clear
the
DELAY
START and STOP TIME dials of any previous
timed cooking
or cleaning
function
by: one at a time,
push the DELAY START and STOP TIME dials in and
turn the dials. Using a light touch, continue
turning the
knob until it "pops"
out. Both dials should
now be in
the out position.
Decide
on the cleaning
hours
necessary.
The rec-
ommended
cleaning
times
are:
Light
to Moderate
Soil--2-3
hours (thin spills and light spatters),
Heavy
Soil--4
hours (heavy, greasy spills and spatters).
Add these hours to the present
time of day, then push
in and turn the STOP TIME dial clockwise
to this later
stop time.
The oven door gets hot during self-cleaning
DO NOT
TOUCH.
The CLEANING
light will glow, indicating
the
controls
have been set correctly
and the clean cycle
has begun.
If a delayed
start has been selected,
the
CLEANING
light will not glow until the start tirne has
been reached
and the clean
cycle begins.
The door
will lock approximately
20 minutes
after the clean
cycle has begun.
To Stop a Clean Cycle
Turn the OVEN TEMP knob to the OFF position,
This
will stop the cleaning cycle but you will not be able to
open the door until the oven cools below the locking
temperature.
After a Clean Cycle
After a clean cycle, you may notice some white ash
in the oven. Just wipe it up with a damp cloth..
If white
spots
remain,
remove them
with a soap-
filled
steel
wool
pad.
Be sure
to rinse
thoroughly,
with a vinegar
and water
mixture..
These
deposits
are usually a salt residue that cannot be removed
by
the clean cycle.
If the oven
is not clean after
one cycle,
the cycle
may be repeated.
If the shelves
have become
hard to slide, wipe the
shelf supports
with cooking
oil.
NOTE:
oWhite
the oven
is self-cleaning
(on models
witl _
press pads),
you can press the CLOCK
pad to dis.
play the time of day. To return
to the clean count,
down, press the COOK TIME ON/OFF
pad,.
o You cannot set the oven for cooking
until the oven i,'
cool enough
for the door to be unlatched,
How to Delay Start of Cleaning
Models
with press
pads:
You will have one minute to set a delayed
start
1.Turn
the OVEN
SET knob and the OVEN
TEMF
knob to CLEAN.
Slide the latch handle to the righ
as far as it will go.
2. If you want to change
the normal
cleaning
time
press
the
UP or DOWN
pad
until
the
desirec
amount of clean time is reached.
3. Press the START TIME ON/OFF
pad.
4. Press the UP or DOWN
pad to set the time of da'
you want cleaning
to start.
Models
with dials:
If you wish to start and stop cleaning
at a later tim_
than shown on the clock, push in and turn the DELA'
START
dial to the time you wish to start,
Add th_
hours
needed
for cleaning
to this "start" time,
the_
push in and turn the STOP TIME dial to this later StOl
time. The oven will automatically
turn on and off at th,
set times,
24
Advertisement
