Repair Procedures - Daikin RXM20R Service Manual

4 | Components

4.11.2 Repair procedures

To remove the intelligent eye sensor
To install the intelligent eye sensor
Service manual
124
Prerequisite: Stop the unit operation via the user interface.
Prerequisite: Turn OFF the respective circuit breaker.
Prerequisite: Remove the required plate work, see
1 Remove the control panel from the indoor unit.
a
a Control panel
b Intelligent eye sensor PCB
2 Disconnect the connector from the intelligent eye sensor PCB.
3 Carefully click the complete intelligent eye sensor PCB out of the indoor unit.
4 To install the
4
procedures" [ 124].
1 Click the intelligent eye sensor PCB on the indoor unit.
a
a Control panel
b Intelligent eye sensor PCB
2 Connect the harness to the intelligent eye sensor PCB.
3 Install the control panel on the indoor unit.
Is the problem solved?
Yes
b
intelligent eye sensor
b
Action
No further actions required.
RXM20~71R(9) + ARXM25~71R(9) + FTXM20~71R + ATXM25~50R +
4
"4.14 Plate work" [ 153].
PCB, see "4.11.2 Repair
FVXM25~50A
Split New Perfera R32
ESIE20-11B – 2022.02