Daikin RXM20R Service Manual page 152

4 | Components
To install the DC fan motor assembly
To install the propeller fan blade assembly
Service manual
152
4 Detach the DC fan motor harness from the switch box.
5 Slightly bend the harness retainers (at the back of the fan motor bracket) to
detach the DC fan motor harness.
6 Remove the 4 screws that fix the DC fan motor assembly.
7 Remove the DC fan motor assembly from the unit.
8 To install the DC fan motor assembly, see
1 Install the DC fan motor assembly in the correct location.
2 Fix the DC fan motor assembly to the unit by tightening the screws.
e f
a Tie strap
b DC fan motor harness
c Switch box
d Fan motor bracket
e Screw
f DC man motor assy
3 Route the DC fan motor harness through the harness retainers (at the back of
the fan motor bracket) and bend the harness retainers to attach the DC fan
motor harness.
4 Attach the DC fan motor harness to the switch box.
5 Install a new tie strap to fix the DC fan motor harness to the switch box.
6 Connect the DC fan motor connector to the connector on the main PCB.
7 Install the propeller fan blade assembly, see
1 Install the propeller fan blade assembly on the DC fan motor assembly.
CAUTION
Do NOT install a damaged propeller fan blade assembly.
2 Install and tighten the nut to fix the propeller fan blade assembly.
"Repair
c
d e
a
RXM20~71R(9) + ARXM25~71R(9) + FTXM20~71R + ATXM25~50R +
4
procedures" [ 150].
b
4
"Repair procedures" [ 150].
Split New Perfera R32
ESIE20-11B – 2022.02
FVXM25~50A