Daikin RXM20R Service Manual page 204

4 | Components
To install the wifi control PCB wiring harness
Service manual
204
5 To install the wifi control PCB wiring harness, see
4
procedures" [ 201].
1 Connect the wiring harness connector to the indoor unit main PCB.
WARNING
When reconnecting a connector to the PCB, make sure to connect it on the correct
location and do NOT apply force, as this may damage the connector or connector
pins of the PCB.
2 Route the wiring harness through the appropriate harness retainers towards
the wifi control PCB.
3 Connect the wiring harness to the wifi control PCB.
4 Fix the wiring harness using new tie straps (if needed).
Is the problem solved?
Yes
No
Action
No further actions required.
Return to the troubleshooting of the
specific error and continue with the
next procedure.
RXM20~71R(9) + ARXM25~71R(9) + FTXM20~71R + ATXM25~50R +
"4.20.2 Repair
FVXM25~50A
Split New Perfera R32
ESIE20-11B – 2022.02