4
|
Components
To remove the electrical wiring box cover
Service manual
162
Floor standing units
1 Remove the front panel. See
2 Remove the 4 screws, remove the grille from 4 tabs on the top and remove
the front grille while pulling it toward you.
a
4×
a Front grille
b Tabs
ATXM-R and FTXM-R units
TO OPEN THE SERVICE COVER
1 Remove 1 screw from the service cover.
2 Pull out the service cover horizontally away from the unit.
a Service cover screw
b Service cover
NOTICE
When closing the service cover, make sure that the tightening torque does NOT
exceed 1.4 (±0.2) N•m.
TO REMOVE THE ELECTRICAL WIRING BOX COVER
Prerequisite: Remove the front grille.
1 Remove 1 screw from the electrical wiring box.
4
"4.14 Plate
work" [
153].
b
a
b
RXM20~71R(9) + ARXM25~71R(9) + FTXM20~71R + ATXM25~50R +
FVXM25~50A
Split New Perfera R32
ESIE20-11B – 2022.02