Daikin RXM20R Service Manual page 52

Hide thumbs Also See for RXM20R:
Table of Contents

Advertisement

4
|
Components
Service manual
52
Refrigerant pressure correct?
Yes
No
4 De-activate Heating and activate Cooling operation via the user interface.
5 Check with a contact thermometer (or by touching) if the flow through the 4-
way valve corresponds with the flow shown in the flow diagram. (See
"7.3 Piping
diagram" [
Is the flow correct?
Yes
No
When outdoor temperature does not allow the unit to run in cooling or heating
mode
INFORMATION
Follow this procedure when the outdoor temperature is outside the temperature
range for one of the operation modes (Heating or Cooling). The unit CANNOT
operate in the mode for which the outdoor temperature is outside its temperature
range. See the databook on Business Portal for the temperature range of the
operation modes.
1 With the unit operating, connect the service monitoring tool to the unit and
check whether the unit is operating in Heating or Cooling mode.
2 Check with a contact thermometer (or by touching) if the flow through the 4-
way valve corresponds with the flow shown in the flow diagram of the specific
operation mode. (See
Is the flow correct?
Yes
No
3 Connect a manifold to one of the service ports of the refrigerant circuit and
check the pressure (suction, discharge). Compare with normal operation
conditions of the unit.
Refrigerant pressure correct?
Yes
No
Action
Replace the body of the 4‑way valve,
see
"4.1.2 Repair
Leaks may be found in the refrigerant
circuit. Perform a pressure test of the
refrigerant circuit, see
procedures" [
4
 237]).
Action
4‑way valve is OK. Return to the
troubleshooting of the specific error
and continue with the next procedure.
Replace the body of the 4‑way valve,
see
"4.1.2 Repair
4
"7.3 Piping
diagram" [
Action
4‑way valve is OK. Return to the
troubleshooting of the specific error
and continue with the next procedure.
Perform the next step of this procedure.
Action
Replace the body of the 4‑way valve,
see
"4.1.2 Repair
Leaks may be found in the refrigerant
circuit. Perform a pressure test of the
refrigerant circuit, see
procedures" [
RXM20~71R(9) + ARXM25~71R(9) + FTXM20~71R + ATXM25~50R +
4
procedures" [
"5.2.1 Checking
4
 207].
4
procedures" [
 237]).
4
procedures" [
"5.2.1 Checking
4
 207].
Split New Perfera R32
ESIE20-11B – 2022.02
 53].
 53].
 53].
FVXM25~50A

Advertisement

Table of Contents
loading

Table of Contents