Multi-Window Menu Options - SMART Board SPNL-6275-V3 Installation And Maintenance Manual

APPENDIX C
USING THE SPNL-6000-V2, SPNL-6000-V1 AND SPNL-6000P ON-SCREEN DISPLAY MENU
Option
Turn On Display
Re-enable Time
Auto Power Off
Video input detect
Setup Reset
Factory Reset

Multi-Window menu options

Option
Multi-Window Mode
Audio Input
Window1
Window2
75 smarttech.com/kb/171167
Values Function
On Sets the display to turn on if the
presence detection sensor detects
Off
users in the room
1Min.–10Min. Sets how long the display waits
before detecting motion again
15Min.–240Min. Sets how long the display waits
before turning off
Off Specifies the default video input
source when video input detection
OPS/HDMI
is enabled
OPS/DisplayPort
[N/A] Restores the setup settings to their
default value
[N/A] Resets options in all menus to their
default values
Values Function
Off Sets the number of video inputs
that appear on the display's screen
Dual
to one (Off), two (Dual) or four
Quad
(Quad)
Window1 Sets the audio input source when
multiple video inputs are displayed
Window2
WIndow3
Window4
[Depends on Select the video input for the first
the model] window
[Depends on Select the video input for the
the model] second window
Notes
Set this option to "Off" if you prefer
the display to remain in Standby
mode when users first enter the
room. A user then needs to press
the Standby button or touch
the screen (if the Wake to Touch
option is enabled) to turn on the
display.
[N/A]
[N/A]
With video input detection, the
display shows the selected video
input when there are no computers
or other input sources connected.
Video input detection is useful in
scenarios where a user connects a
laptop to the display for a meeting
and forgets to return to the default
video input after disconnecting the
laptop.
[N/A]
[N/A]
Notes
If you use this feature, be aware
that SMART doesn't support touch
while multiple input sources appear
on the display.
You can modify this option only if
you select Dual or Quad in
Multi-Window Mode.
You can modify this option only if
you select Dual or Quad in
Multi-Window Mode.
You can modify this option only if
you select Dual or Quad in
Multi-Window Mode.