Appendix B: Using The Spnl-6000-V3/Sbid-6000 On-Screen Display Menu; Changing Settings In The On-Screen Display Menu - SMART Board SPNL-6275-V3 Installation And Maintenance Manual

Appendix B
Using the
SPNL-6000-V3/SBID-6000
on-screen display menu

Changing settings in the on-screen display menu

Picture menu options
Sound menu options
OSD menu options
Setup menu options
About menu options
On SPNL-6000-V3/SBID-6000 models, you can access the on-screen display menu using the front
control panel (see Front control panel on page 9).
Changing settings in the on-screen display menu
To change settings in the on-screen display menu
1. Press the Menu button
The on-screen display menu appears.
2. Press the Move Up
the Select button
3. Press the Move Up
4. Press the Increase
OR
Press theSelect button
change settings in the submenu.)
5. Press and hold the Menu button
67 smarttech.com/kb/171167
on the front control panel.
and Move Down buttons to highlight a menu item, and then press
.
and Move Down buttons to highlight a menu option.
and Decrease buttons to change the menu option's setting.
to open the menu option's submenu. (Repeat steps 3 and 4 to
until the on-screen menu closes.
67
68
69
69
69
70