Selecting Mounting Hardware; Selecting A Wall Mount - SMART Board SPNL-6275-V3 Installation And Maintenance Manual

CHAPTER 2
INSTALLING THE DISPLAY
NOTE
Refer to the display's specifications for its weight (see More information on page 13).
In some situations, you may need to request an engineering analysis to determine if the wall can
support the display.

Selecting mounting hardware

The mounting hardware required for installation varies according to the type of wall onto which the
display is being mounted.
Refer to the installation instructions for the mounting hardware required for the display.

Selecting a wall mount

It is always best to mount the display on a wall. If the wall can't support the display's weight, you
can use additional hardware to transfer some of the weight to the floor.
SMART offers two wall mounts for SMART Board
displays: WM-SBID-501 and
displays can use the WM-SBID-501 while the WM-
SBID-502 is for larger and heavier displays. These
mounts can be purchased separately or as part of a
SMART Wall Stand Kit (WSK-Single or WSK-Dual).
These wall-stand kits are not free-standing mounts;
they still require a wall that can support the
display's weight.
If you choose a third-party option rather than one of SMART's mounting options, be sure the wall
mount can support the display's weight as well as the weight of any attached accessories and can
accommodate the display's dimensions.
23 smarttech.com/kb/171167
WM-SBID-502. Most