Supermicro Super FatTwin F627G3-FT+ User Manual page 74

FatTwin F627G3-FT+/FTPT+/F73+/F73PT+ USER'S MANUAL
Ethernet Ports
Two Ethernet ports (LAN1, LAN2)
are located on the I/O front panel.
These Ethernet ports support 10G
LAN connections on the X9DRFF-iTG+
and X9DRFF-7TG+, or the 1G LAN
connections on the X9DRFF-iG+ and
X9DRFF-7G+.
In addition, an IPMI LAN port is also
located on the front panel. All these
ports accept RJ45 cables. Please refer
to the LED Indicator Section for LAN LED
information.
Power Button/Unit Identifi er Switch
A Unit Identifier switch (SW1) and a
UID LED Indicator are located on the
serverboard. In addition, a power button
(PWR_SW1) is located next to the UID
switch on the front panel. When you press
the UID switch, the UID LED Indicator will
be turned on. Press the UID switch again
to turn off the UID LED. The UID Indicator
provides easy identifi cation of a system
unit that may be in need of service.
Note: UID can also be triggered via IPMI
on the serverboard. For more information
on IPMI, please refer to the IPMI User's
Guide posted on our website @
www.supermicro.com.
LAN Ports (LAN1/2)
Pin# Defi nition
1 P2V5SB
2 TD0+
3 TD0-
4 TD1+
5 TD1-
6 TD2+
7 TD2-
8 TD3+
9 TD3-
NC indicates no connection.
UID Switch (SW1)
Pin#
1
2
3
4
UID LED (UID_LED1)
Color/State OS
Blue: On
Blue:
Blinking
http://
5-20
Pin Defi nition
Pin# Defi nition
10 SGND
11 Act LED
12 P3V3SB
13 Link 100 LED
(Yellow, +3V3SB)
14 Link 1000 LED
(Yellow, +3V3SB)
15 Ground
16 Ground
17 Ground
18 Ground
Pin Defi nitions
Defi nition
Ground
Ground
Button In
Ground
Status
Status
Windows OS Unit Identifi ed
Linux OS Unit Identifi ed