Supermicro Super FatTwin F627G3-FT+ User Manual page 129

Chapter 7: BIOS
CPU1 Slot J1 PCI-E 3.0 x16 OPROM
Select Enabled to enable Option ROM support to boot the computer using a device
installed on the slot specifi ed above. The options are Enabled and Disabled.
CPU1 Slot J2/Slot J3 PCI-E 3.0 x8 OPROM
Select Enabled to enable Option ROM support to boot the computer using a device
installed on the slot specifi ed above. The options are Enabled and Disabled.
PCH Slot J4 PCI-E 2.0 x4 OPROM
Select Enabled to enable Option ROM support to boot the computer using a device
installed on the slot specifi ed above. The options are Enabled and Disabled.
CPU2 Slot SXB1A/Slot SXB1B PCI-E 3.0 x16 OPROM
Select Enabled to enable Option ROM support to boot the computer using a device
installed on the slot specifi ed above. The options are Enabled and Disabled.
Onboard LAN Option ROM Select
Select iSCSI to use the iSCSI Option ROM to boot the computer using a network
device. Select PXE (Preboot Execution Environment) to use an PXE Option ROM to
boot the computer using a network device. The options are PXE, iSCSI and FCoE.
Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM
Select Enabled to enable the onboard LAN1 or LAN2 Option ROM. This is to boot
the computer using a network device. The default setting for LAN1 Option ROM is
Enabled, and for LAN2 Option ROM is Disabled.
Load Onboard SAS OPROM
Select Enabled for onboard SAS Option ROM support. This is to boot the computer
using a SAS device. The options are Disabled and Enabled.
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard, and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unifi ed
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled.
IPv4 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv4 PXE Support. The options are Enabled
and Disabled.
7-17