Supermicro Super FatTwin F627G3-FT+ User Manual page 61

7. With the CPU inside the socket, inspect the four corners of the CPU to make
sure that the CPU is properly installed.
8. Close the load plate with the CPU inside the socket. Lock the lever labeled
'Close 1st' fi rst, then lock the lever labeled 'Open 1st' second. Use your
thumb to gently push the load levers down to the lever locks.
9. Repeat steps to install a CPU to CPU Socket #2 if needed.
Gently close the
load plate.
Lever Lock
Chapter 5: Advanced Motherboard Setup
Push down and lock
the lever labeled
'Open 1st'
5-7
Push down and lock the
level labeled 'Close 1st'.
Lever Lock