Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the FatTwin™
F627G3-FT+/FTPT+/F73+/F73PT+. Installation and maintainance should be
performed by experienced technicians only.
The FatTwin F627G3-FT+/FTPT+/F73+/F73PT+ is a high-end server based
on the F424AG-R1K62B 4U rackmount chassis and a dual processor
X9DRFF-iG+/iTG+/7G+/7TG+ serverboard. All models have four IPMI LAN port and
eight serverboard nodes with two (2) hot-swap 3.5" SAS or SATA Hard Disk Drives
(HDD) each per node. The F627G3-F73+ and F627G3-F73PT+ servers have SAS2
instead of SATA drives, while both the F627G3-FTPT+ and F627G3-F73PT+ servers
use 10-Gigabit LAN ports instead of Gigabit LAN ports.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X9DRFF-iG+/iTG+/7G+/7TG+
serverboards and the F424AG-R1K62B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the FatTwin
F627G3-FT+/FTPT+/F73+/F73PT+ into a rack and check out the server
confi guration prior to powering up the system. If your server was ordered without
processor and memory components, this chapter will refer you to the appropriate
sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Warning Statements for AC Systems
You should thoroughly familiarize yourself with this chapter for a general overview of
safety precautions that should be followed when installing and servicing the FatTwin
F627G3-FT+/FTPT+/F73+/F73PT+.
Preface
iii
Preface
Advertisement
Table of Contents
