Supermicro Super FatTwin F627G3-FT+ User Manual page 105

Installing a Front 10" Intel Phi GPU into a Bracket
1. Remove the power cord from the rear of the node as described in Section
6-3. Remove the node from the chassis as described in Section 6-4. Place
the node on a fl at, stable surface and remove the node cover as described in
Section 6-7.
2. Secure both mounting brackets with three screws.
3. Insert the GPU into the GPU bracket and secure with fi ve screws.
4. Confi rm that the GPU is securely mounted in the GPU bracket
Figure 6-19: Installing the Front 10" Intel Phi GPU into the Bracket
1
2
Installing a Front 10" NVIDIA GPU into a Bracket
1. Remove the power cord from the rear of the node as described in Section
6-3. Remove the node from the chassis as described in Section 6-4. Place
the node on a fl at, stable surface and remove the node cover as described in
Section 6-7.
2. Position the NVIDIA GPU as illustrated below.
3. Insert the GPU into the GPU bracket and secure with four screws.
4. Confi rm that the GPU is securely mounted in the GPU bracket..
Figure 6-20: Installing the Front 10" NVIDIA GPU into the Bracket
1
2
Chapter 6: Advanced Chassis Setup
1
3
1
3
6-19
1
4
1
4