Table of Contents
Advertisement
OPERATION SETTING
22
AI / Auto operation
Auto operation's initial desired temperature is 25°C.
The cooling exclusive model's initial desired temperature is "It's Fine".
Cooling/heating model's desired temperature can be controlled in the units of 1°C or 0.5°C.
For cooling exclusive model, the value can be controlled from "hot" stage to "cold" stage.
- Hot
- A little hot
- It's fine
- A little cold
- Cold
- If you unit is operating in ai/auto mode and you press the [On/Off] button the ai/auto operation
will shut off.
NOTE
!
If the product is a cooling/heating model, in the auto operation, the desired temperature can
be selected in the range of 18°C ~ 30°C.
If it does not operate as you wish, select another operation mode.
Dual setpoint auto operation
The indoor unit automatically manages room temperature with extended heating and cooling
setting temperature ranges.
Dual setpoint auto mode can be set in the USER SETTING. This is recommended in North
America region.
NOTE
!
• Auto heating function only operates on cooling and heating models.
• Auto heating function doesn't operate on cooling only models.
• When remote controller has a connection with indoor unit that does not support 'dual
setpoint', thermal operation function of indoor unit is replaced with ON/Off control from the
wired remote, when the user sets target temperatures in the below ranges.
- cooling target temp. range : 87~99 °F (30.5~37.5 °C)
- heating target temp. range : 40~59 °F (4~15.5 °C).
OPERATION SETTING
23
Advertisement
Table of Contents
