Dehumidification Mode; Auto Changeover Mode; Auto Operation Mode - LG PQRCUSA0 Owners & Installation Manual

Owner's instruction

Dehumidification Mode

Auto Changeover Mode

28 Wide Wired Remote Controller
1 Press button to turn on the
indoor.
2
Press button to select
Dehumidification mode.
The temperature setting can not
be adjusted during operation
this mode.
3 Press the button to select
airflow rate SLO ¡ LO ' MED ¡
HI ¡ (NONE) ¡
(The lists depends on products function)
❖ NONE : Power level of Fan Speed
In rainy season or high humidity climate, it is possible
to operate simultaneously dehumidifier and cooling
mode to remove humidity effectively.
1 Press button to turn on the
indoor.
2 Press button to select Auto
Changeover Mode.
3 The setting temperature as
the right side picture can be
set in both cooling/ heating
model.
❖ Setting Temp Range : 18˚C~30˚C (64˚F~86˚F)

Auto Operation Mode

❖ Auto Changeover mode and Auto Operation mode may not operate depending on product type.
For more detail please refer the product manual.
Please select the code defend on your feeling.
<Code Table>
Code Feel
2 Cool
1 Slightly cool
0 Neutral
-1 Slightly warm
-2 Warm
Owner's instruction
1 Press button to turn on the
indoor.
2 Press button to select Auto
Operation Mode.
3 Incase of operating under
only cooling mode, set '0' as
standard level, we can adjust
the temperature from step -2
to step 2.
During operating Auto Operation mode:
• We can use the FAN SPEED button
• We can change manually to other operation mode.
Owner's & Installation Manual 29