USER SETTING
118
Backlight Dimming Brightness
This function sets the brightness when adjusting the remote control's screen.
• Select the following setting values using [<,>(left/right)] button.
0%
10% (default)
CAUTION
!
If the set value is used at 30 %, the LCD life may be reduced.
※ "Auto" setting is only available in the indoor units that is equipped with the human detection
sensor.
※ When set to Auto, the wired remote control brightness (0 %, 10 %, 20 %, 30 %) is
automatically adjusted according to the light intensity detected by the human body sensor.
Value
20%
30%
Auto
External device setting
Set the name of external equipment and equipment logic setting
• In the user setting list, select the external device setting category, and press [OK] button to
move to the detail screen.
USER SETTING
119
OK