LG PREMTB001 Owners And Installation Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Remote Control
  5. PREMTB001
  6. Owners and installation manual

LG PREMTB001 Owners And Installation Manual

New wide wired remote controller
Hide thumbs Also See for PREMTB001:
Table of Contents

Advertisement

Quick Links

OWNER'S & INSTALLATION MANUAL
NEW WIDE WIRED
REMOTE CONTROLLER
• Please read this installation manual completely before installing the product.
• Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
• Please retain this installation manual for future reference after reading it thoroughly.
Models : PREMTB001 / PREMTBB01
www.lg.com
P/NO : MFL62129220

Advertisement

Table of Contents
loading

Related Manuals for LG PREMTB001

Summary of Contents for LG PREMTB001

  • Page 1 • Please read this installation manual completely before installing the product. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only. • Please retain this installation manual for future reference after reading it thoroughly. Models : PREMTB001 / PREMTBB01 www.lg.com P/NO : MFL62129220...

  • Page 2: Important Safety Instructions

    TIPS FOR SAVING ENERGY IMPORTANT SAFETY INSTRUCTIONS TIPS FOR SAVING ENERGY IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions Always comply with the following precautions to avoid dangerous situations and ensure peak below: performance of your product...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS Function setting – Child Lock Different Mode Drive Installer Setting – Option Function IMPORTANT SAFETY Setting Function setting – Changing Current Self-diagnosis for Trouble Mode INSTRUCTIONS Time Installer Setting – Indoor Unit Address Outage Compensation Function Checking Function setting –...

  • Page 4: Part Description

    PART DESCRIPTION INSTALLATION INSTRUCTION PART DESCRIPTION OWNER’S INSTRUCTION Standard Operation – Standard Cooling A pleasant and fresh breeze cools off the room. Operation Display Windows Sub function Button Airflow Button Set/Cancel Button Function Setting Button Temperature Ventilation Button Control Button On/Off Button Reservation Button Operation Mode...

  • Page 5: Standard Operation - Power Cooling

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Standard Operation – Power Cooling Standard Operation – Heating Mode It cools off faster and more powerfully. A warm breeze blows out to the room. Press button in the remote controller, and press button to select heating. Press button to turn on the indoor.

  • Page 6: Standard Operation - Dehumidifying Mode

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Standard Operation – Dehumidifying Mode Standard Operation – Monsoon Dehumidifying Mode It removes moisture while cooling gently. This is monsoon region-specific dehumidification function. P P ress button. P P ress button. Press button to select Dehumidify. Press button to select Dehumidify.

  • Page 7: Standard Operation - Fan Mode

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Standard Operation – Fan Mode Standard Operation – Auto Operation Mode It blows the air in the room, not blowing cold air. It automatically selects an operating mode. Press button. P P ress button. Press button to select Artificial intelligence Mode. Press button to select Fan mode.

  • Page 8: Standard Operation - Temperature Setting / Room Temperature Check

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Standard Operation – Temperature Setting / Room Temperature Check Standard Operation – Fan Speed / Airflow Temperature Setting Fan Speed The temperature can be controlled easily to the desired set point. The fan speed can be adjusted easily to the desired set point. Press temperature control button to select the desired temperature.

  • Page 9: Sub Function - Plasma Purification

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Sub Function - Plasma Purification Sub Function – Manual Settings for Robot Cleaning Air purifying function cleans the air in the room. Robot Cleaning is a function that a built-in cleaner performs a filter cleaning automatically when air-conditioner runs for the scheduled hours.

  • Page 10: Sub Function - Electric Heater

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Sub Function – Electric Heater Sub Function – Humidifier It is a function to amplify the heating capacity by running an electric heater in the heating mode. It is a function to run the built-in humidifier when the air in the room is dry. This function can be set only in the heating mode.

  • Page 11: Sub Function - Himalaya Cooling

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Sub Function – Himalaya Cooling Function setting - Vane Angle Control Only products with Himalaya Cooling function can use this. You can adjust the angles of air flow. Press button. P P ress button repeatedly until Himalaya cooling icon displays.

  • Page 12: Function Setting - Zone Control

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Function setting - Zone Control Function setting - Elevation Grill You can turn on/off the zones by used of it. This function is to run the elevation grill to clean the filter of indoor unit. Press button repeatedly until icon is blinking.

  • Page 13: Function Setting - Auto Cleaning

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Function setting - Auto Cleaning Function setting - Automatic Setting for Robot Cleaning Auto cleaning is a function to remove moisture or mold after turning off the cooling system by Robot Cleaning is a function that a built-in cleaner performs a filter cleaning automatically when drying the inside of indoor unit.

  • Page 14: Function Setting - Filter Sign Clear

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Function setting – Child Lock Function setting – Filter Sign Clear This function is to lock the buttons to prevent children or others from careless using. This function is to cancel the filter indicator for filter cleaning of indoor unit. Press button repeatedly until icon is blinking.

  • Page 15: Function Setting - Changing Current Time

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Function setting – Changing Current Time Function setting – Change Temperature Change temperature is a function to automatically change the temperature between cooling/heat- ing according to the temperature in the Auto operation mode. Press button repeatedly to select the time setting in the menu. ‘Time Setting’...

  • Page 16: Function Setting - Power Consumption

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Function setting – Power Consumption Function setting – Indoor/Outdoor Unit Model Information Press button repeatedly to select the power consumption in the menu. Press button repeatedly to select the Indoor/outdoor unit model information in the menu. icon will display and the accumulated power consumption will display in the temperature and icon will display and the Indoor/outdoor unit model information will display in the temperature the current time display section.

  • Page 17: Function Setting - Wlan

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Function Setting - WLAN(Wireless LAN) Module Access Point <Indoor/Outdoor Unit Model Information Table> mode It is the function to operate WLAN (Wireless LAN) module connected to the product in access Category Display Values point mode. This function is available for particular models to apply WLAN Module. Refer to the installation manual of product whether available or not.

  • Page 18: Programming - Simple Reservation

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Programming – Simple Reservation Programming – Sleep Reservation Simple reservation function can be scheduled to stop while the system is in operation or to run Sleep Reservation is a function that the air-conditioner runs in the sleep mode or stops after certain while the system is not in operation.

  • Page 19: Programming - On Reservation

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Programming – ON Reservation Programming – OFF Reservation It turns ON automatically at the time programmed. It turns OFF automatically at the time programmed. Press button to enter the programming mode. Press button to enter the programming mode. Press button repeatedly to select ‘ON’.

  • Page 20: Programming -Weekly Reservation

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Programming –Weekly Reservation Change the time using F G button. - You can program the ‘Hour’ from 1 hour up to 12 hours. You can program daily schedule by week. Weekly reservation keeps operating until before you cancel it once you setup. Move to ‘Minute’...

  • Page 21: Programming -Holiday Reservation

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Programming –Holiday Reservation Ventilation Product User Manual – Interlinked Air conditioner and Ventilation The system will stop automatically on a set day. You can control the system by using a wired remote controller for an air conditioner indoor unit interlocked with a ventilator.

  • Page 22: Ventilation Product User Manual - Interlinked Operation With General Ventilation

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Ventilation Product User Manual – Interlinked Operation with Ventilation Product User Manual – Single Operation with General Ventilation General Ventilation It can be used only when the air conditioner and the ventilator are interlocked. This function is to This function is to circulate the air in the room using a general ventilator.

  • Page 23: Ventilation Product User Manual - Interlinked Operation With Direct Expansion Ventilation

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Ventilation Product User Manual – Interlinked Operation with Ventilation Product User Manual – Single Operation with Direct Direct Expansion Ventilation Expansion Ventilation It can be used only when the air conditioner and the direct expansion ventilator are interlocked. This function performs ventilation operation with cooling or heating at the same time using the heat exchanger inside the direct expansion type ventilation product.

  • Page 24: Ventilation Product Additional Operations - Fast/Energy Saving

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Ventilation Product Additional Operations – Fast/Energy Saving Ventilation Product Function Settings This function is to facilitate the ventilation function more efficiently by setting quick/energy-saving Ventilation starts after delay time. mode in the additional functions of ventilator. Delay time Fast Ventilation starts after delay time.

  • Page 25: Ventilation Product Reservation Settings

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Ventilation Product Reservation Settings Ventilation Product Installer Setting Functions Sleep Reservation You can program a ventilator to run moderately while you are sleeping Press button to enter the ventilation mode. Press and hold button for more than 3 seconds to enter the installer settings mode. Press button to enter the schedule programming mode.

  • Page 26: Ventilation Product Installer Setting Functions - Ventilation Fan Speed

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Ventilation Product Installer Setting Functions - Ventilation Fan Speed Different Mode Drive This function is to change the standard fan speed of ventilation. Different mode drive appears when the Indoor Unit have different operating modes if several Indoor Unit are installed for a single outdoor unit.

  • Page 27: Self-Diagnosis For Trouble Mode

    OWNER’S INSTRUCTION OWNER’S INSTRUCTION Self-diagnosis for Trouble Mode Oil Change Warning Only products with GHP(Gas Heat Pump) Product can use this. It automatically runs a self-diagnosis when there is a trouble detected in the system. Once the operation hours of the outdoor unit passes 10,000hours, the oil change-Indicator alarm It displays the troble mode number with maintenance CODE.

  • Page 28: Installation Instruction

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Please fix remote controller upper part into the setup board <Connecting order> attached to the surface of the wall, as the picture below, and then, connect with setup board by pressing lower part. Please fix tightly using provided screw after placing remote controller setup - Please connect not to make a gap at the remote controller and board on the place where you like to setup.

  • Page 29: Group Control

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Group Control Installer Setting – Installer Setting Mode Approach Master Slave Slave When installing more than 2 units of air condi- tioner to one wired remote controller, please connect as the right figure. Signal wire • If it is not event communication indoor unit, DC 12 V set the unit as slave.
  • Page 30 INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting Code Table 00: Fan speed -Low Fan operation in the cooling mode and thermal off con- 01: Fan OFF <General air conditioner product code table> ditions. 02: Fan speed setting value Use Primary Heater control 00: Cancel primary heater control Code Function Value...

  • Page 31: Installer Setting - Test Run

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Test run <Ventilator code table> A test run must be performed after installation. Code Function Value See the product manual for more details about test run. Test run 01 : Test Run Setup Address Setting 00~FF : Address of Central Control SA(Supply Air) ESP...

  • Page 32: Installer Setting - Setting Address Of Central Control

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Setting Address of Central Control Installer Setting – ESP Setting This function is to be used when connecting to a central controller. This function is to facilitate the installation by assigning a fan speed value to each speed. See the central controller manual for more detailed functions.

  • Page 33: Installer Setting - Thermistor

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Thermistor This function is to select a temperature sensor to determine the indoor temperature. Set the ESP value using F G button. Press and hold button for more than 3 seconds to enter the installer settings mode. - If pressing only once briefly, it will enter the user settings mode.

  • Page 34: Installer Setting - Ceiling Height Selection

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Ceiling Height Selection Installer Setting – Static Pressure Setting This function is to adjust the level of fan speed according to the height of ceiling for ceiling type Selecting the static pressure is only available for duct products. product.

  • Page 35: Installer Setting - Remote Controller Master/Slave Setup

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Remote Controller Master/Slave Setup Installer Setting – Override Master/Slave Setting This function is the settings when controlling 2-remote controls or group control. Override master/slave selection function is, since Multi-V 7 series model, the function to prevent product's different mode operation.

  • Page 36: Installer Setting - Dry Contact Mode Setting

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Dry Contact mode Setting Installer Setting – Zone State This function is available only for the products with dry contact device. This function is to set the fan speed mode of indoor unit as fixed or variable. - Variable : Comp ON, setup fan speed.

  • Page 37: Installer Setting - Celsius/Fahrenhei Switching

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Celsius/Fahrenhei Switching Installer Setting – Zone Type Setting This function is used for switching the display between Celsius and Fahrenheit. This function is only available on some products. It is possible to setup zone new type or old one of the product which is available to install the damper controller.

  • Page 38: Installer Setting - Zone Number Setting

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Zone Number Setting Installer Setting – Celsius Control Setting This function is only available on some products. Zone Number is to set the number of installed This function is to set the unit for temperature control by 1°C or 0.5°C. zones.

  • Page 39: Installer Setting - Emergency Heater Setting

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Emergency Heater Setting Move to Low Ambient Heating Operation setting by pressing I button. This function is only available on some products This function will set the Emergency Heater Setting. Emergency Heater is used to heat the space in emergency case such as heat pump error. Emergency heat is in place of and does not supplement heat pump.

  • Page 40: Installer Setting - Function Control Setting For Group Control

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Function Control Setting for Group Control Installer Setting – Option Function Setting This function is to control the common functions or some functions based on the master indoor This function is used when air Cleaner, heater, humidifier, elevation grill, ventilation KIT are unit criteria for group control.

  • Page 41: Installer Setting - Indoor Unit Address Checking

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Indoor Unit Address Checking Installer Setting – Setting for Refrigerant Leak Detector This function is to identify the indoor unit address assigned by the outdoor unit. This function is used when a refrigerant leak detector is additionally installed in the indoor unit or the installed detector is removed.

  • Page 42: Installer Setting - Static Pressure Step Setting

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Static Pressure Step Setting Installer Setting – Fan operation in the cooling mode and thermal off conditions This function is applied to only duct type. Setting this in other cases will cause malfunction. This is the function to set indoor unit fan operation at the cooling mode and thermal off condi- This function is only available on some models.

  • Page 43: Installer Setting - Primary Heater Control Setting

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Primary Heater control setting Installer Setting – Air-conditioner Fan operation interlocked with ventilation It is a function that sets the outdoor unit to operate with auxiliary heat source and the heater to It is a function that sets the availability of air conditioner FAN movement when only the ventila- run with main heat source in heating mode.

  • Page 44: Installer Setting - Indoor Unit Auto-Start Setting

    INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION Installer Setting – Indoor unit Auto-Start setting Installer Setting – Occupancy Duration Time Setting It is a function that sets whether to restore the indoor unit operation by resuming the previous It is a function that sets the occupancy duration after motion is detected when installing an occu- power-on state or as power-off state in the power failure compensation.

  • Page 45: Installer Setting - Setting For Simple Dry Contact Unit

    INSTALLATION INSTRUCTION CHECKLIST BEFORE REPORTING A BREAKDOWN Installer Setting – Setting for Simple Dry contact unit CHECKLIST BEFORE REPORTING A BREAKDOWN This function is used when simple dry contact unit is additionally installed in the indoor unit or the Please first check the items below for product's defects before consulting to service center. installed simple dry contact unit is removed.

This manual is also suitable for:

Premtbb01

Table of Contents