Table of Contents
Advertisement
FUNCTION SETTING
112
- Select the Set time item and press the [OK] button to move to the Set time screen.
- After selecting the start and end time, press the [OK] button to set the Preheating Mode
Schedule time.
NOTE
!
• When the Preheating Mode Schedule is running, it is displayed in the monitoring
information.
The Set Snow Removal Mode setting is a function to set whether to operate the outdoor fan
when it snows to remove the snow.
- After selecting the Set Snow Removal Mode item, you can use the [<,> (left/right)] buttons to
set it as follows.
Value
Not Use
Don't use Set Snow Removal Mode
Use
Use Set Snow Removal Mode
Description
USER SETTING
How to enter user setting
To enter the menu displayed at the bottom, you need to enter the user setting menu as follows.
- Select the setting category, and press [OK] button to move to the setting list.
- Select the user setting category, and press [OK] button to move to the user setting list.
User Setting
- You can set the product user functions.
- Some functions may not be available in some product types.
Menu
Language setting
Set the language to be displayed on the remote controller.
Setpoint Type Setting
It is the function to set GUI type on the remote controller.
Temperature unit setting
Set the temperature unit displayed on the remote controller.
Backlight Dimming Time
This function sets the remote control's brightness adjustment time.
This function sets the brightness when adjusting the remote control's
Backlight Dimming Brightness
screen.
External device setting
Set the name of external equipment and equipment logic setting
Date setting
Set the date displayed on the remote controller.
Time setting
Set the time displayed on the remote controller.
Summer time setting
Set the summer time in the remote controller.
Password setting
Set the password to prevent unauthorized change to remote controller settings.
Schedule initialization
Initialize all timer settings in the remote controller.
Theme setting
Set the theme of the remote controller screen.
It is the function to decide whether to display humidity on the main
Humidity display
screen and additional information screen.
System reboot
Restart the remote controller.
Indoor unit display light
This function adjusts the brightness of the indoor unit display light.
brightness
USER SETTING
OK
Description
113
Advertisement
Table of Contents
