Table of Contents
Advertisement
OPERATION SETTING
24
Power Cool Operation
Power cooling quickly lowers the indoor temperature.
Desired temperature: 18°C
Fan speed : Power fan speed
Fan direction: Current fan direction
- During the power cooling, if fan speed or desired temperature is changed, the power cooling is
cleared, and it operates in the cooling operation mode.
- During the power cooling, if you press [On/Off] button, the power cooling operation stops, and
when you press [On/Off] button again, it operates in the cooling operation mode.
Power Heat Operation
Power heating increases indoor temperature quickly.
Desired temperature: 30 °C
Fan speed: Power fan speed
Fan direction: Current fan direction
- If you adjust the fan speed or the desired temperature during power heating, the function is
disabled and heating operation mode is activated.
- If you press [On/Off] button during power heating, the function stops and if you press [On/Off]
button again, heating operation mode is activated.
OPERATION SETTING - VENTILATOR
Operation mode
Ventilation (general and direct cooling type ventilation) operation mode supports the following
operation modes.
※Some products may not support some operation modes.
Mode
Classification
It measures the ventilation system's indoor
temperature and the outdoor temperature for the
Auto
automatic operation in the optimal ventilation mode
state.
Ventilation operation
It is the mode of ventilation with both supply/discharge
mode – commonly
through the heat exchanger. It is adequate to use in
Heat Exchange
supported by
summer/winter where the indoor/outdoor temperature
ventilation products
difference is big.
It is the ventilation where the exhausted air is ventilated
without going through the exchanger. It is adequate to
Bypass
use in spring/fall or when the indoor contamination is
severe.
Cool
Cools down the room to desired temperature.
Air conditioner
Heat
It provides warm air to the room.
operation mode –
supports direct
The product automatically provides the appropriate fan
Auto
cooling type
speed based on the temperature of the room.
ventilation
Stop
It stops the product's air conditioner operation.
In the main screen, press [<,>(left/right)] button to select the operation mode category, and press
[∧,∨(up/down)] button to set the operation mode.
※The direct cooling type ventilation's air conditioner operation mode is composed separately
from the ventilation operation mode.
OPERATION SETTING - VENTILATOR
25
Description
Advertisement
Table of Contents
