Table of Contents
Advertisement
OPERATION SETTING – Standard Mode
18
● If it is cooling/heating model, you can control the desired temperature.
- Indoor temperature is displayed on the remote controller default screen.(As below the pic-
ture)
- According to the indoor unit type, the desired temperature can be controlled in the units of
1°C or 0.5°C(2°F or 1°F)
● If it is cooling only model, you can control the stages from 'hot' to 'cold' with values of '-2' to
'2' based on '0'.
ex) If you feel cold, select "2".
If you feel a little cold, select "1".
If you want to keep the current state to select "0".
If you feel a little quite warm and select "-1".
If you feel quite warm and select "2".
● If you press On/Off button during use, product operation will stop.
!
NOTE
If it does not work as desired, select another operation mode.
2 set point auto operation (North America Only)
The indoor unit automatically manages room temperature with heating and cooling with extended
setting temperature ranges.
2 set point auto mode can operate in 2 set point control mode.
● Press remote controller screen 1 time to turn on.
- If remote controller operation is not used, screen will go into energy savings mode.
● During the operation of the indoor unit, press the mode button on the screen.
- It moves to the operation mode selection screen.
● In operation mode selection screen, press the 'AUTO' button.
2 : cold
- "AUTO" when the operation mode is selected, desired temperature is indicated cooling and
1 : a little cold
heating temperature is desired.
0 : adequate
- "COOL" operation mode when selected,displays only the desired cooling temperature (cooling
only the desired temperature control available)
-1 : a little hot
- "HEAT" only when the operation mode selection, Heating desired temperature is displayed
-2 : hot
(only heating temperature control can hope)
OPERATION SETTING – Standard Mode
19
Advertisement
Table of Contents
