Temperature Setting; Controlling Desired Temperature; Check Room Temperature - LG PREMTTB101 Owners & Installation Manual

TEMPERATURE SETTING

26
TEMPERATURE SETTING

Controlling Desired Temperature

You can easily control to the desired temperature.
• In the main screen, press [<,>(left/right)] button to select the desired temperature category,
and press [∧,∨(up/down)] button to set the desired temperature.
- In the cooling, heating, and AI/auto mode, the desired temperature control is possible.
Mode
If the desired temperature is higher than the indoor temperature, the
cooling is not performed.
Cool
Set the desired temperature lower than the indoor temperature.
You can select in the range of 18°C ~ 30°C (16°C ~ 30°C).
If the desired temperature is lower than the indoor temperature, the
heating is not performed.
Heat
Set the desired temperature higher than the indoor temperature.
You can select in the range of 16°C ~ 30°C.
For cooling/heating product, you can select in the range of 18°C ~ 30°C.
AI / Auto
For cooling exclusive product, you can select Hot, A little hot, Adequate,
A little Cold, and Cold.
NOTE
!
The favorable temperature difference between the indoor temperature and the outdoor
temperature is 5°C.
Description

Check Room Temperature

You can check the current indoor temperature.
• In the remote controller's the main screen, you can check the indoor temperature.
NOTE
!
The temperature distribution in the remote controller installation space is not uniform, so
there can be a little difference between the temperature you actually feel and the remote
controller's room temperature display
According to Control type setting value
• Single setpoint
Fahrenheit: 52~99 °F
- below 52 °F: display 'LO'
- over 99 °F: display 'HI'
Celsius: 10.5~39.5 °C
- below 10.5 °C: display 'LO'
- over 39.5 °C: display 'HI'
• Dual setpoints
Fahrenheit: 34~99 °F
- below 34 °F: display 'LO'
- over 99 °F: display 'HI'
Celsius: 0.5~39.5 °C
- below 0.5 °C: display 'LO'
- over 39.5 °C: display 'HI'
- For indoor temperature below 50 °F (10 °C), the value perceived by the Thermostat(with
cable) is displayed.
• Because of location of Temperature sensing, the real room temperature and the this
displayed value can be different.
TEMPERATURE SETTING
27