Table of Contents
Advertisement
FUNCTION SETTING
94
Smart load control(SLC) setting
Change the outdoor unit's Smart Load Control stage value.
(Smart load control is the function to calculate the indoor air temperature, outdoor air
temperature, and humidity to operate effectively.)
• In the function setting list, select the Smart load control category, and press [OK] button to
move to the detail screen.
Off
Value
On
- When SLC is Operating, on the expanded screen's monitoring information, 'In Smart load
control' is displayed.
NOTE
!
Smart load control function can be set only when the installer setting's outdoor unit function
M/S setting is set to "Master".
Smart load control function is only available in some products.
Step4 settings may not be available on some indoor unit products.
OK
Step 0
Step 1
Step 2
Step 3
Step 4
Low noise mode time setting
It is the function to set the start and end time of the outdoor unit's low noise mode operation.
• In the function setting list, select the Low Noise Mode Time category, and press [OK] button to
move to the detail screen.
- After setting the start time and the end time, press [OK] button to move to the upper level
list.
- If the start time and the current time are the same, it enters the outdoor unit low noise
operation mode, and in the monitoring screen, 'in outdoor unit low noise operation mode'
message is displayed.
- If the end time and the current time are the same, the outdoor unit low noise operation mode
is cleared.
NOTE
!
Low noise mode time setting function can be set only when the installer setting's outdoor
unit function M/S setting is set to "Master".
Low noise mode time setting function is only available in some products.
CAUTION
!
If the function is not used, please set it to Off.
When you enter the low noise operation, the cooling capacity may be degraded.
FUNCTION SETTING
95
OK
Advertisement
Table of Contents
