Table of Contents
Advertisement
FUNCTION SETTING
86
Dead Band
Dead Band function is used with a dual setpoint mode.
When heating and cooling desired temperatures have been changed, the set value will maintain a
difference between the heating and cooling desired temperature.
• In the function setting list, select the dead band category, and press [OK] button to move to the
detail screen.
NOTE
!
Dead Band function only can use in dual setpoint mode.
• When changing the desired cooling temperature, in case of that the difference with the
heating temperature becomes lesser than its minimal value of difference, it lowers the
desired heating temperature automatically.
• When changing the desired heating temperature, in case of that the difference with the
heating temperature becomes lesser than its minimal value of difference, it raises the
desired cooling temperature automatically.
OK
Wi-Fi pairing setting
It is the function to perform the pairing function of the Wi-Fi module connected to the indoor unit.
• In the function setting list, select the Wi-Fi pairing category, and press [OK] button to move to
the detail screen.
- After selecting "Apply", if you press [OK] button, the Wi-Fi pairing popup window is created,
select "check" and press [OK] button to request the Wi-Fi pairing.
NOTE
!
The Wi-Fi setting function may not work in some products.
FUNCTION SETTING
87
OK
Advertisement
Table of Contents
