Notes On Usage And Storage; Installation Space; Notes When Using The Printer; Notes When Not Using The Printer - Epson SureColor SC-F6300 Series User Manual

SC-F6300 Series User's Guide
Notes on Usage and
Storage

Installation space

Make sure that you secure the following space, clear of
any other objects, so that paper ejection and
consumable replacement are not obstructed.
See the "Specifications Table" for the external
dimensions of the printer.
"Specifications Table" on page 106
U

Notes when using the printer

Note the following points when using this printer to
avoid breakdowns, malfunctions, and print quality
decline.
❏ When using the printer, observe the operating
temperature and humidity range described in the
"Specifications Table". U
on page 106
Even when the conditions above are met, you may
not be able to print properly if the environmental
conditions are not suitable for the paper. Be sure to
use the printer in an environment where the paper's
requirements are met. For more details, see the
documentation supplied with the paper.
Also, when operating in dry areas, air conditioned
environment, or under direct sunlight, maintain
the appropriate humidity.
Introduction
"Specifications Table"
15
❏ Make sure the work space is kept clean. If dust or
lint enter into the printer, it could damage the
printer, clog the print head nozzles, or cause the
quality of paper feeding to decline.
❏ Avoid using the printer in locations with heat
sources or that are exposed to direct draughts from
ventilators or air conditioners. The print head
nozzles could dry out and clog.
❏ Use the printer in a location that is sufficiently
ventilated.
❏ The print head may not be capped (i.e., may not
move to the right-hand side) if an error occurs and
the printer is turned off without first resolving the
error. Capping is a function for automatically
covering the print head with a cap (lid) to prevent
the print head from drying out. In this case, turn on
the power and wait a while until capping is
performed automatically.
❏ When the power is on, do not remove the power
plug or cut the power at the breaker. The print head
may not be capped properly. In this case, turn on the
power and wait a while until capping is performed
automatically.
❏ Do not bend or tug the waste ink tube. Ink could
spill inside or around the printer.
❏ As well as being expended during printing, ink is
used during head cleaning and other maintenance
required to keep the print head in working order.
Be sure that the Waste Ink Bottle is placed whenever
the printer is on.
❏ To ensure the colors you want to print, maintain a
constant room temperature of 15 to 25˚C.

Notes when not using the printer

If you are not using it, note the following points when
storing the printer. If it is not stored correctly, you may
not be able to print properly the next time it is used.