Raytheon Speed Queen AWM190 Service Manual page 71

•
•
•
SECTION V
Test Procedures
A
WARNING~~~~~~~~~~~~~~~~~~~~~~~~----.
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
36793
reconnected to ensure that the washer is properly grounded.
w oo3
EMERSON MOTOR SWITCH
NOTE: Refer to SECTION VII for Internal Wiring of Washer Motor Switch.
START
TERMINALS
HIGH SPEED
TERMINALS
LOW SPEED
TERMINALS
A W A R N I N G - - - - - - - - - - - .
Disconnect electric power to washer
before performing the following
steps, or when replacing switch.
A.
CONTINUITY EXISTS BETWEEN
NO
SWITCH TERMINAL R
AND RED WIRE .
YES
B.
MANUALLY DEPRESS ACTUATOR.
CONTINUITY BROKEN BETWEEN
INOPERATIVE START SWITCH.
SWITCH TERMINAL R
REPLACE SWITCH.
AND RED WIRE.
YES
c.
CONTINUITY EXISTS BETWEEN
NO
SWITCH TERMINAL P
AND BLUE WIRE.
YES
D.
MANUALLY DEPRESS ACTUATOR.
CONTINUITY BROKEN BETWEEN
INOPERATIVE HIGH SPEED
SWITCH TERMINAL P
SWITCH. REPLACE SWITCH.
AND BLUE WIRE.
YES
E.
CONTINUITY BROKEN BETWEEN
NO
SWITCH TERMINAL P
AND VIOLET WIRE.
YES
F.
MANUALLY DEPRESS ACTUATOR.
CONTINUITY EXISTS BETWEEN
INOPERATIVE LOW SPEED
SWITCH TERMINAL P
SWITCH. REPLACE SWITCH.
AND VIOLET WIRE.
YES
MOTOR SWITCH
CHECKS OK .
69