Mode - Sinclair SDV 6 User & Installation Manual

4.3

Mode

OFF
Select the mode on the menu and press "
entering the mode, press "
press " " for confirmation. Or press " Back " to exit.
Mode conflict:
1. When the system detects any mode conflict, the main screen of the
wired controller will display a message indicating that no heating or
cooling option is available.
2. All IDUs in the same air conditioning system can only operate in the
same mode (such as cooling and heating). A conflict will occur if the
IDUs operate in different modes. Therefore, make sure that the
operating mode of all IDUs is the same.
Auto mode is specific to some IDUs; Dry mode is not supported on
FAPUs.
Mode
" or " " to select the operating mode, and
08
Cold
" for confirmation. After