Sinclair SDV 6 User & Installation Manual page 69

IDU set
Parameter name
item
Indoor temperature for auxiliary
heat source/alternative heat
source to turn on
IDU
Indoor temperature for auxiliary
setting
heat source/alternative heat
source to turn off
IDU control type
Auto dry function
Air flow setting at fan
speed 7
Fan speed setting in
cooling standby mode
Fan
speed
setting
Standby fan speed L1
range in dry mode
Fan speed setting in
heating standby mode
Time to stop the fan of
IDU in heating mode
(Thermal)
Parameter range
0-7 0 to 7 represent 0 to 7°C/°F
0-10 0 to 10 represent -4 to 6°C/°F
00/01/02 SDV6 FAPUs, SDV6 AHU-KIT: Valid;
SDV6 FAPUs, SDV6 AHU-KIT: Valid;
00: Supply air temperature control;
01: Room temperature control;
02: Return air temperature control
00/01 00: Invalid; 01: Valid;
Note: Not supported on FAPUs.
00: Constant speed;
00/01
01: Constant air flow
00/01/02/03/04/ 00: Delayed fan shutdown;
05/06/07/14 01: Speed 1; 02: Speed 2; 03: Speed 3;
04: Speed 4; 05: Speed 5; 06: Speed 6;
07: Speed 7;
14: Fan speed before going to
standby mode
00/01/02/03 00: Fan off;
02: L2;
Note: Not supported on FAPUs.
00/01/14 00: Thermal; 01: Speed 1;
14: Lock speed 1
00/01/02/03/04 00:Fan off; 01: 4min;
02: 8min;
04: 16 min (SDV6 protocol);
Note: Not supported on FAPUs.
66
Remarks
01: L1;
03: Speed 1；
03: 12min;