Sinclair SDV 6 User & Installation Manual page 62

8.4 IDU settings
SDV5 protocol
IDU set
Parameter name
item
Static pressure setting
of IDU
On-site
settings
On-site air flow adjustment factor
IDU buzzer
EXV opening selection
during heating standby
Mode changeover interval
in Auto mode (min)
Power failure memory
for IDU
IDU
Up/down swing for IDU
setting
Left/right swing for IDU
Remote control
instruction receiving on
IDU display panel
Auxiliary heat source
available for IDU
Parameter range
00/01~19/FF
The IDU sets the static
pressure based on the set
gear, FF (VRF unit: main
board DIP of IDU; other
models: reserved)
00/01 00: 1, 01: 1.1
00/01 00: Not sound; 01: Sound
00/01/02/FF
00: 56P, 01: I72P,
02: 00P; FF: IDU DIP
00/01/02/03 00: 15min, 01: 30min,
02: 60min, 03: 90min
00/01 00: Not available; 01: Available
00/01 00: Not available; 01: Available
Note: Not supported on FAPUs.
00/01 00: Not available; 01: Available
Note: Not supported on FAPUs.
00/01 00: Receive; 01: Not receive
00/01 00: Not available; 01: Available
Note: Not supported on FAPUs.
59
Remarks