Backlight Time; Backlight Brt - Sinclair SDV 6 User & Installation Manual

5.8 Backlight time

Setting
Tempe in auto
mode
Backlight
time
Intelligent network
Key tone prompt
The backlight time can be set to 15s, 30s,or 60s. After the setting, if the
device fails to receive any command within the set backlight time, it will
enter the standby interface.
You can press "

5.9 Backlight brt

Tempe in auto
mode
Backlight brt
Intelligent network
Key tone prompt
The Backlight brt has 10 levels, used to set the display brightness of the
device. The brightness increases from level 1 to 10.
You can press "
15second
ON
" to adjust the backlight time.
Setting
level6
ON
" to adjust the backlight brightness.
35
Setting
Tempe in auto
mode
Backlight
30second
time
Intelligent network
Key tone prompt
OFF
Setting
Tempe in auto
mode
Backlight brt
level7
Intelligent network
Key tone prompt
OFF