One-To-More - Sinclair SDV 6 User & Installation Manual

5.14 One-to-more

One wired controller can control more than one IDU (up to 16 IDUs). One to
more control includes group control and individual control. Under group
control, the device sends commands to all IDUs in a unified manner. Under
individual control, the device sends commands to any IDU in the system.
(1) One to more group control
Enable the one to more function by entering the Engineering Settings > IDU
Settings > SiteConfig. Once this function is enabled, the system enters the
one to more group control by default. Under group control, the device sends
commands to all IDUs and all IDUs execute the same commands. The main
interface of the device under one to more group control is the same as that
under one to one control. The function in the list should be subjected to the
IDU.
(2) One to more individual control
Under one to more group control, you can switch to individual control through
the one to more individual control in the list. Under individual control, the main
interface of the device switches to the main interface of individual control.
One-to-more individual control Main interface of individual control
41