Cool Mode Operation - Sinclair AMC-14Aa MOBILE SERIES User Manual

COOL MODE OPERATION

１８ Ｃ
０
HIGH
TIME
AM
SEND
DRY
Hr
Min
ON/OFF
● When temperature of room sensor is higher
than the set temp, compressor runs, the unit starts
cooling operation.
COOL
● When temperature of room sensor is lower
than the set temp, compressor stops, the unit runs
in "FAN" mode.
● The set temp should be in range of 16℃~30℃.
Ｏ
O
(61 F~86 F).
NOTE: When using Fahrenheit remote controller
c
the sign ' ', '+
O
O
changed to ' F','+
－13 －
1. After inserting the batteries, press
"ON/OFF" key to start the unit.
2. Press "MODE" key, to choose "COOL"
mode.
3. Press "FAN" key, to set fan speed.
4. Press "TEMP" key, to set the desired
temp.
5. Press "SEND" key, send the operation
to the unit.
c c
O ' or '- O 'will be corresponding
O O
F' or '- F'.