Sinclair SDV 6 User & Installation Manual page 50

7 INSTALLATION
7.1 Installation Precautions
● To ensure correct installation, read the "Installation" section of this
manual.
● The content provided here covers warnings, which contain important
information about safety that must be followed.
Entrust a local distributor or local service agent to appoint a
qualified technician to perform the installation. Do not try to install
the unit by yourself.
Do not knock, throw, or randomly disassemble the wired
controller.
The wiring must be compatible with the wired controller current.
Use the specified cables, and do not place any heavy object on
the wiring terminals.
The wired controller line is a low-voltage circuit, which cannot
come into direct contact with the high voltage line or be laid in the
same wiring tube together with the high voltage line. The
minimum spacing of wiring tubes is 300 to 500 mm.
Do not install the wired controller in corrosive, flammable and
explosive environments or places with oil mist (such as a
kitchen).
CAUTION
47