New Marker Dialog Box; Operating Panel Page - Kongsberg Simrad SY50 Manual

Simrad SY50 Software Release Note

New Marker dialog box

The dialog box allows you to create a new marker based on the known depth
New Marker
and geographical position of a new target.
How to open
The dialog box is opened from the
New Marker
Description
Use this functionality if you need to create
a marker based on geographical information
from an external source. You can place
markers on for example wrecks, obstacles
on the seabed or coral reefs. For each new
marker you must provide:
• Longitude
• Latitude
• Depth
• Position Input Format
When the new marker is created, it is automatically assigned a unique identifier (UID) by
the SY50 system.

Operating Panel page

The Operating Panel offers all necessary control functions for normal operation. It
further allows you to assign certain functions to dedicated buttons and switches. The
page is used to select which physical hardware panel you use, and to
Operating Panel
assign functionality to the programmable buttons.
Prerequisites
The dialog box is not available when your SY50 system is set to Replay mode.
Installation
How to open
This page is located in the
on the menu.
Setup
Description
The controls provided by the Operating Panel are arranged in logical functional groups.
This offers you clear and easy operation with fast access to key functionality. All the
14
dialog box. To open the page, select
Installation
button in the
New Objects
menu.
Installation
490366/B