Warning Labels - SawStop TSG-FDC Owner's Manual

6. Keep hands out of the line of the saw blade. Never reach around or over the saw
blade. Keep proper footing and balance at all times.
7. Maintain the floating dust collection guard as specified in this manual. Use only
identical replacement parts when servicing the floating dust collection guard.
8. Turn the power disconnect switch to OFF before servicing the saw and/or
floating dust collection guard. Always ensure the power is OFF before changing
components or accessories such as blades, brake cartridges, and the like.
9. Check to make sure the saw and floating dust collection guard are in proper
working order before using them. For example, check the alignment of moving
parts, look to see whether moving parts are binding or rubbing, check to see
whether parts are broken, make sure accessories are properly mounted in the saw,
and check any other conditions that may affect the operation of the saw or floating
dust collection guard. A guard or other part that is damaged should be properly
repaired or replaced.

Warning Labels

The following warning labels are located on the floating guard support arm within the
floating blade guard. Be sure to read all warnings and the warning labels before using
the saw. A copy of the English text of the warning labels is reproduced below:
25
TSG-FDC OWNER'S MANUAL
WARNING
!
1. Use the blade guard and spreader for every
operation for which it can be used.
2. Use the riving knife for non-through sawing.
3. Keep hands away from the saw blade. Use a
push-stick when required.
WARNING:
This product can expose you to chemicals
including wood dust, which is known to the
State of California to cause cancer. For more
information, go to www.P65Warnings.ca.gov.