Table of Contents
Advertisement
Reference the table and figure
2
below for accurate placement of
the bracket based on your saw
model configuration. The mounting
pins on the Dust Collection Guard
Mounting Bracket [B] should align
with the center of the blade.
Bracket Mounting
Extension
Distance Between Bracket and
Saw
Table
Rear of Extension Table
36"
4"
ICS
52"
4"
TGP2 36"
1 5/8"
PCS
TGP2 52"
1 5/8"
TGP2 36"
1"
CNS
TGP2 52"
1"
The distance between the mounting bracket and the rear edge of the extension table
should match the value listed for your model saw in the table above.
i
The elongated mounting slots in the bracket will allow for some adjustment of the positioning if
needed once it has been mounted to the extension table.
Place a mark on the extension table
3
in the center of each of the four
elongated mounting slots in the
Dust Collection Guard Mounting
Bracket [B].
MOUNTING
PINS
B
B
TSG-FDC OWNER'S MANUAL
6
Advertisement
Table of Contents
