Use a 10mm wrench to tighten the
10
two Lock Nut - M6 x 1.0 [U] on both
leg support brackets.
Attaching the Dust Tubes to the Dust Collection Guard Mounting Bracket
IT IS RECOMMENDED THAT TWO PEOPLE ATTACH THE DUST TUBES,
AS THE DUST TUBE ASSEMBLY IS HEAVY AND COULD CAUSE SERIOUS
PERSONAL INJURY OR DAMAGE IF DROPPED.
First, remove the end cap from Outer
1
Dust Tube – Straight [F] .
Insert the reduced end of the Outer
2
Dust Tube – Curved [E] into the
larger diameter end of Outer Dust
Tube – Straight [F]. Be mindful that
the gasket included with the curved
tube is remains properly seated and
aligned while joining parts [E] and [F].
Align the pre-drilled holes in [E] and
[F] then insert four Bolt - M5 X 0.8,
10mm, Button Head, Socket [W] into
the holes and tighten to secure the
outer tube sub-assembly together.
U
F
E
W
TSG-FDC OWNER'S MANUAL
14