Attaching The Dust Collection Hose To The Dust Tube And The Floating Blade Guard - SawStop TSG-FDC Owner's Manual

The amount of clamping force exerted by
the Dust Tube Lock Knob can be adjusted
i
by loosening the nut adjacent to the pivot
point of the handle using a 17mm wrench
and threading the handle in or out. Once
the desired clamping pressure has been
reached, the nut can be re-tightened.
Attaching the Dust Collection Hose to the
Dust Tube and the Floating Blade Guard
Slide one end of Dust Collection
1
Hose [H] over the end of the Inner
Dust Tube [G], making sure that the
included hose clamp is about 1/4"
to 1/2" inset from the end of the
dust tube.
Slide the other end of the Dust
2
Collection Hose [H] onto the
Floating Blade Guard (I), making
sure the hose clamp is about 1/4" to
1/2" over the edge of the Floating
Blade Guard [I] 4" port.
Using a screwdriver, tighten the
4
included hose clamps to secure the
dust hose both fittings described in
steps 1 and 2.
H
H
I
G
E
I
TSG-FDC OWNER'S MANUAL
G
18