Appendix C System Specifications - Supermicro SuperServer SYS-1029UX-LL1-S16 User Manual

Table of Contents

Advertisement

Appendix C: System Specifications
Appendix C
System Specifications
Processors
Dual Intel Xeon 81xx/61xx/51xx/41xx/31xx series or 82xx/62xx/52xx/42xx/32xx series processors in a Socket P type socket
(Intel Xeon Gold 6144, 6146 and 6154 for -LL1, -LL2, and -LL3, respectively)
Note: Please refer to the motherboard specifications pages on our website for updates to supported processors.
Chipset
Intel C621 chipset
BIOS
32Mb AMI® Flash ROM
Memory
Sixteen DIMM slots to support up to 3TB of ECC, DDR4-2666/2400 Registered DIMM (RDIMM) memory
Note: Twelve 16GB DIMMs have been pre-installed in the system. See the memory section in Chapter 5 for details and our
website for updates to supported memory.
SATA Controller
Intel C621 controller
Drive Bays
Ten 2.5" hot-swap drive bays
PCI Expansion Slots (supported)
Two PCI-E 3.0 x16 slots (with included riser card)
One PCI-E 3.0 x8 (with included riser card)
Motherboard
X11DPU-XLL; ATX form factor (17 x 16.8 in. / 432 x 427 mm.)
Chassis
SC119UTS-R751P; 1U rackmount, 17.2 x 1.7 x 27.8 in. (437 x 43 x 706 mm) (W x H x D)
System Cooling
Eight 4-cm counter-rotating PWM fans
Power Supply
Model: PWS-751P-1R
AC Input Voltages: 100-240 VAC
Rated Input Current: 9.5-4.5A
Rated Input Frequency: 50-60 Hz
Rated Output Power: 750W
Rated Output Voltages: +12V, +12Vsb (2A)
Operating Environment
Operating Temperature: 10º to 35º C (50º to 95º F)
Non-operating Temperature: -40º to 70º C (-40º to 158º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
139

Advertisement

Table of Contents
loading

Table of Contents