Supermicro SuperServer SYS-1029UX-LL1-S16 User Manual page 74

SuperServer SYS-1029UX-LL1-S16/LL2-S16/LL3-S16 User's Manual
CPU T State Control
Software Controlled T-States
Select Enable to support Software Controlled Throttling states for CPUs installed on the
motherboard. Such throttling states control the running time of CPUs with the goal of cooling
down CPUs and preventing them from burning out. The options are Disable and Enable.
Chipset Configuration
Warning: Setting the wrong values in the following sections may cause the system to malfunc-
tion.
North Bridge
This feature allows the user to configure the settings for the Intel North Bridge.
UPI (Ultra Path Interconnect) Configuration
This section displays the following UPI General Configuration information:
•
Number of CPU
•
Number of IIO
•
Current UPI Link Speed
•
Current UPI Link Frequency
•
UPI Global MMIO Low Base/Limit
•
UPI Global MMIO High Base/Limit
•
UPI PCI-E Configuration Base/Size
Degrade Precedence
Use this feature to select the degrading precedence option for Ultra Path Interconnect
connections. Select Topology Precedent to degrade UPI features if system options are in
conflict. Select Feature Precedent to degrade UPI topology if system options are in conflict.
The options are Topology Precedence and Feature Precedence.
Link L0p Enable
Select Enable to enable Link L0p. The options are Disable, Enable, and Auto.
74