Transport, Packing, Storage; Safety Warnings; Transport Inspection; Packing - DEMAG ZBA Assembly Instructions Manual

Brake motors
Table of Contents

Advertisement

6

Transport, packing, storage

6.1 Safety warnings

6.2 Transport inspection

6.3 Packing

6.4 Storage
62
WARNING.
Suspended load. Falling parts.
Risk of injury from falling parts
Secure components when they are transported. Do not step under suspended
loads.
CAUTION.
Danger caused by inappropriate transport
Inappropriate transport may result in damage to the motor.
Lift loads only at the marked lifting points. Only use suitable lifting equipment
which has sufficient load capacity.
Handle motors with utmost care to avoid damage caused by careless loading and
unloading, for example.
• Check the delivery immediately on receipt to ensure that it is complete and
examine it for any damage caused in transit.
• If any transport damage is visible from the outside, only accept the delivery on
condition. Note the scope of damage in the shipping documents/delivery note of
the forwarding company and lodge a claim.
• Lodge a claim for any defects as soon as they are detected, since claims for
damages may only be asserted within the relevant claim notification periods.
If no agreement has been made on the return of the packing material, separate the
materials according to type and size and make them available for further use or
recycling.
Environmental protection:
• Always dispose of packing materials in an environmentally compatible way and
according to locally applicable disposal regulations.
• If required, utilise the services of a recycling company.
Motors must be stored as follows:
• in dry places with only minor temperature fluctuations
• in their service position
• protected against dust and moisture
• on a wooden support
• free from vibration (no impacts).
Motors must not be stacked on top of each other.
Unless agreed otherwise, limited liability for defects is granted for the standard
preservative in accordance with our terms and conditions of delivery. The period
begins on the day the unit is shipped.
Contact the manufacturer if the motors are to be stored for more than 6 months
before they are put into operation.
IMPORTANT. Failure to comply can result in damage to motors.
i

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

ZbeZbpZbf

Table of Contents